Product Description

Our replacement Juwel Ballasts are compatible with the 54w Juwel T5 tubes. Needing to replace the ballast in your Juwel light unit? Both bulbs stopped working?
The Hereplacementcment T5 Ballasts will be perfect for the job in hand.

The Helvar Ballasts are to be used with High Output tubes where these to be the standard 24w, 39w, 54w, 80w or the JUWEL compatible High Output tubes, 24w, 28w, 35w, 45w, 54w or 54w (1200mm) Please see which model you require from the table below:

Note – Juwel have used several different ballasts in their High Lite Units over the years. Some with 6 connections, soome with 7 and some with 8. If you follow the wiring diagram displayed on the front of your ballasts and the replacement ballast the fitting of your new ballat will be straight forward.  Specific instructions for fitting your ballast are available on request.

The Helvar ballast should be used with solid single core cable (available from iQuatics) in:

• 1 Meter (2.99)
• 5 Meter (£5.99)
• 10 Meter (£9.99)

Click Here for wiring instructions.

High Output T5’s are better to use in your aquarium lighting than the regular T8 as they have increased water penetration and are more efficient. You don’t lose the illumination at the bottom of the deeper tanks. With this lighting you are not restricted as much to the content of your aquarium, stock levels can be increased without the worry of inadequate levels of light.

The greater intensity, deeper penetration and Higher output allows you to stock your tank with a wide range of soft corals and allow them to flourish which was not possible with T8 Fluorescents.

Key Benefits of our High Output T5’s:

• Greater Intensity
• Deeper Penetration
• High Power

*Ballast provided may differ from that pictured, all ballasts will be of exact specifications and full wiring instructions provided*